Homepage
PH 100
Gear testing machine
 Specifications |
|
| Catalog No. : | 1289 |
| Type: | PH 100 |
| Producer: | MAAG |
| Made in: | GO 1997 |
| Characteristic: | |
| Min Tooth Size Module 0.5 | |
| DP 50 | |
| Max Tooth Size Module 20 | |
| DP 1.25 | |
| Min/Max Adjustable Base Circle Diameter 200/1000mm | |
| Max Generating Path w/Max Base Circle 600mm | |
| Max Tip Circle Diameter A 1050mm | |
| Max Pinion Length (using vertical support) H 830mm | |
| Min Pinion Length (using vertical support) | |
| a) Standard Model 290mm | |
| b) Special Model (w/special vertical support) 100mm | |
| Min/Max Shaft Diameter for Steady L 100/200mm | |
| Diameter of Standard Work Table d 350mm | |
| Diameter of Large Work Table (special model) D 750mm | |
| Adjustability of Pick-Up Slide V 350mm | |
| Max Facewidth b | |
| At Helix Angle of 0 Deg 260mm | |
| At Helix Angel of 60 Deg 130mm | |
| Total Scanning Height M 678mm | |
| Error Magnification of Recorder Unit With: | |
| Read-Off Accuracy for Base Circle 0.001mm | |
| Read-Off Accuracy for Helix Angle 1 sec | |
| Max Permissible Weight of Gear 1000kg | |
| Mains Rating 400 VA | |
| Overall Length of Machine 2470mm | |
| Overall Width of Machine 1640mm | |
| Overall Height of Machine w/Vertical Support 2300mm | |
| Weight of Machine 2500kg | |
Gallery
