HomepageNC/CNC Emcoturn ET 425

CNC Double Turning Center

EMCO425-1JPG.jpg
Specifications
Catalog No. :1872
Type:Emcoturn ET 425
Producer:EMCO
Made in:1999
Characteristic:
Control: SIEMENS Sinumerik 810 T
Work space:
Swing over cross slide: 160 mm
Slide traverse : (x.x) per 75 mm
Slide traverse : (Z.Z) per 190 mm
Distances spindle noses head stock to spindle nose counter head stock: min.169 mm
Distances spindle noses head stock to spindle nose counter head stock: max.409 mm
Max.Work piece size for rod parts: each 26 mm
Max.Work piece size for rod parts: length about 120 mm
Max.Work piece size for rod parts: (theoretically Max.length each 240 mm)
Main head stock:
Spindle connection (centering): 70 h 5
Spindle diameter in front bearing: 60 mm
Spindle bore: 38 mm
Rod for Material: 28/26 mm
Counter head stock / sub-spindle ):
Spindle connection (centering): 70 h 5
Spindle diameter in front bearing: each 60 mm
Part hollow tension : max.100 mm
For wedge chuck: 25 mm
For chuck: 26 mm
Travel (Z): 240 mm
Travel speed: 12 m / min
Clamping: pneumatic
Positioning: on Z slide
Clamping system:
Main spindles (left):
Each clamping cylinder with draw tube for bar material: up to 26 mm
Axial hollow clamping cylinder: 4000-10500 N
Counter spindles (right):
Each clamping cylinder with draw tube and integrated / pneumatic
Axial hollow clamping cylinder: 4000-8000 N
Main drive:
AC Motor power (100% ED) 11 kW
Maximum torquet: 33 Nm
Speed ​​range: 20-5000 U / min
Feed drives:
AC motors in Z and X-axis
Feed force along / plan: each 3000 N
Feed rate of: 0.01 mm / rev to rapid
Rapid traverse longitudinal / plan: each 12/8 m / min Acceleration time from 0 to rapid traverse along / Plan: 0.1 sec each
Tooling system:
Number of tool holders: 12
Tool holder: EMCO VDI 16
Shaft: 16 mm
Holder:
Power operated wedge chuck: 95 mm
Material passage: max. 25 mm
Incl jaw length: 87.5 mm
Length for feeding plan area: 57.5 mm
Lubrication system:
Guide ways and ball screws: autom. Central oil lubrication
Main spindles: Grease lubrication (lubricated for life)
Coolant system
High-pressure pump (for tool cooling)
Chip conveyors:
Pneumatic connection
Electrical Connection:
Power supply: 3 x 400 V 50/60 Hz
Power consumption: 15 kVA
Machine dimensions: 1139 x 990 x 1780 mm
Machine weight: 2600 kg Automatic
Automatic bar loader FMB double-turbo 240 S-1
                                                                         

Gallery

























Video