Homepage
Prima
Machining center (horizontal)
 Specifications |
|
| Catalog No. : | 5459 |
| Type: | Prima |
| Producer: | TOS |
| Made in: | 2007 |
| Characteristic: | |
| Control system: Heidenhain iTNC 530 | |
| Total hours: 66000 h | |
| Hours on: 24830 h | |
| Length of the working table: 1250 mm | |
| Width of the working table: 1000 mm | |
| Number of tools in the magazine: 40 pcs | |
| X-Axis travels: 2000 mm | |
| Y-Axis travels: 1300 mm | |
| Z-Axis travels: 1600 mm | |
| Power of the spindle: 65 kVA | |
| Max. tool diameter: 125 mm | |
| Max. tool lenght: 500 mm | |
| Max. tool weight: 25 kg | |
| Maximum tool weight: 1000 kg | |
| Rapid traverse: 30000 mm/min | |
| Range of working feeds: 1-20000 mm/min | |
| Equipment: | |
| Chip convoyer | |
| 4 pallets | |
| Tool changer | |
| Internal cooling | |
| Axis X. Y. Z. W. B. C. | |
| Availability: 1Q / 2022 | |
| GO 2021: | |
| Replacement of the spindle and bearings of the main headstock bearing | |
| Replacement of linear guide and carriages of all axes | |
| Replacement of bearings in ball screws of Y. W. Z. X | |
| Replacement of cover of axis guide surfaces | |
| Repair if it is still possible or replace the ball screws of the X. Y. Z. W axes | |
| Replacement of the pins of the reinforcing bars and the locking pins | |
| Replacement of pistons and foils of pallet base reinforcement units | |
| Revision of the clamping base | |
| Overhaul of measuring rulers | |
| Replacement of X. Z. Y. W feed axle belts and main bearing drive belts | |
| Replacement of all moving wires located in the cable tray | |
| Revision of and replacement of worn parts | |
| Overhaul of motors and replacement of bearings | |
| Anchor material | |
Gallery
