Homepage
Injection molding machines
TRX 100
Injection moulding machine
![3751TEDERIC-1JPG.jpg](../admin/fotogalerie/middle-3751TEDERIC-1JPG.jpg)
![]() Specifications |
|
Catalog No. : | 3751 |
Type: | TRX 100 |
Producer: | TEDERIC |
Made in: | 2009 |
Characteristic: | |
Screw diameter: 35- 38- 42 mm | |
Screw : 21.7 -20.0 -18.1 L/D ratio L/D | |
Shot size (theoretical): 159- 187- 228 m3 | |
Injection weight: 144 -170- 208 g | |
Injection rate: 89 -105- 128 cm3/s | |
Injection pressure: 194 165 135 Mpa | |
Injection stroke: 165 mm | |
Screw speed: 0-191 rpm | |
Clamping unit Clamping force: 1000 KN | |
Clamping stroke: 320 mm | |
Space between tie bars: 360 x 360 mm | |
Max Mold height: 350 mm | |
Min Mold height: 100 mm | |
Ejector stroke/force: 100/38 KN/mm | |
No. of ejector pins piece: 5 | |
Others Max pump pressure: 16 Mpa | |
Pump Motor Power: 11.0 KW | |
Heater power: 7 KW | |
Hopper capacity. 25 L | |
Oil tank capacity: 180 L | |
Machine dimensions: | |
(LxWxH) 4100 x 1100 x 1800 mm | |
Machine weight: 3500 kg | |